19-12
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 19 Configuring Traffic Control
Displaying Traffic Control Settings
Displaying Traffic Control Settings
Table 19-3 Commands for Displaying Traffic Control Status and Configuration
Command Purpose
show ethernet service instance number interface
interface-id mac security
Displays information about MAC security configured on the service
instance.
show interfaces [interface-id] switchport Displays the administrative and operational status of all switching
(nonrouting) ports or the specified port, including port blocking
settings.
show storm-control [interface-id] [broadcast |
multicast | unicast]
Displays storm control suppression levels set on all interfaces or the
specified interface for the specified traffic type or for broadcast traffic
if no traffic type is entered.
To Next Page
Loading...
Need help?
General