Cisco 3845 - Security Bundle Router - Routing Configuration Mode; Multicast Source Discovery Protocol (MSDP) Commands; Global Configuration Mode; Privileged EXEC Mode

C-7
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Appendix C Unsupported Commands in Cisco IOS Release 12.2(52)EY
Multicast Source Discovery Protocol (MSDP) Commands
Routing Configuration Mode
interface auto-template
mpsl traffic-eng mesh-group (ISIS mode)
mpsl traffic-eng multicast-intact (ISIS mode and OSPF mode)
tunnel destination mesh-group
Multicast Source Discovery Protocol (MSDP) Commands
Privileged EXEC Mode
show access-expression
show exception
show pm LINE
show smf [interface-id]
show subscriber-policy [policy-number]
show template [template-name]
Global Configuration Mode
ip msdp default-peer ip-address | name [prefix-list list] (Because BGP/MBGP is not supported, use the
ip msdp peer command instead of this command.)
NetFlow Commands
Global Configuration Mode
ip flow-aggregation cache
ip flow-cache entries
Quality of Service (QoS) Commands
Global Configuration Mode
priority-list