16-14
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 16 Configuring Resilient Ethernet Protocol
Monitoring REP
Monitoring REP
Table 16-1 REP Monitoring Commands
Command Purpose
show interface [interface-id] rep [detail] Displays REP configuration and status for a
specified interface or for all interfaces.
show rep topology [segment segment_id]
[archive] [detail]
Displays REP topology information for a segment
or for all segments, including the primary and
secondary edge ports in the segment.
To Next Page
Loading...
