xxxvi
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Preface
Interactive examples use these conventions:
• Terminal sessions and system displays are in screen font.
• Information you enter is in boldface screen font.
• Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).
Notes and cautions use these conventions and symbols:
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in
this manual.
Caution Means reader be careful. In this situation, you might do something that could result in equipment
damage or loss of data.
Related Publications
These documents provide complete information about the switch and are available from these Cisco.com
sites:
ME 3800X switch:
http://www.cisco.com/en/US/products/ps10965/tsd_products_support_series_home.html
ME 3600X switch:
http://www.cisco.com/en/US/products/ps10956/tsd_products_support_series_home.html
Note Before installing, configuring, or upgrading the switch, see these documents:
• For initial configuration information, see the “Configuring the Switch with the CLI-Based Setup
Program” appendix in the hardware installation guide.
• For upgrading information, see the “Downloading Software” section in the release notes.
• Release Notes for the Cisco ME 3800X and ME 3600X Switch
Note See the release notes on Cisco.com for the latest information.
• Cisco ME 3800X and ME 3600X Switch Software Configuration Guide
• Cisco ME 3800X and ME 3600X Switch Command Reference
• Cisco ME 3800X and ME 3600X System Message Guide
• Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
• Cisco ME 3800X and ME 3600X Switch Getting Started Guide
• Installation Note for the Cisco ME 3800X and ME 3600X Switch Power Supply and Fan Modules
• Regulatory Compliance and Safety Information for the Cisco ME 3800X and ME 3600X Switches
To Next Page
Loading...
Need help?
General