Contents
xxii
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Proxy ARP 29-10
Default Gateway 29-10
ICMP Router Discovery Protocol (IRDP) 29-10
Configuring Broadcast Packet Handling 29-12
Enabling Directed Broadcast-to-Physical Broadcast Translation 29-12
Forwarding UDP Broadcast Packets and Protocols 29-13
Establishing an IP Broadcast Address 29-14
Flooding IP Broadcasts 29-14
Monitoring and Maintaining IP Addressing 29-16
Enabling IPv4 Unicast Routing 29-16
Configuring RIP 29-17
Default RIP Configuration 29-18
Configuring Basic RIP Parameters 29-18
Configuring RIP Authentication 29-20
Configuring Split Horizon 29-20
Configuring Summary Addresses 29-21
Configuring OSPF 29-22
Default OSPF Configuration 29-23
Nonstop Forwarding Awareness 29-24
Configuring Basic OSPF Parameters 29-24
Configuring OSPF Interfaces 29-25
Configuring OSPF Network Types 29-27
Configuring OSPF for Nonbroadcast Networks 29-27
Configuring Network Types for OSPF Interfaces 29-27
Configuring OSPF Area Parameters 29-29
Configuring Other OSPF Parameters 29-30
Changing LSA Group Pacing 29-31
Configuring a Loopback Interface 29-32
Monitoring OSPF 29-33
Configuring EIGRP 29-33
Default EIGRP Configuration 29-35
Nonstop Forwarding Awareness 29-36
Configuring Basic EIGRP Parameters 29-36
Configuring EIGRP Interfaces 29-37
Configuring EIGRP Route Authentication 29-38
Configuring EIGRP Stub Routing 29-39
Monitoring and Maintaining EIGRP 29-40
Configuring BGP 29-41
Default BGP Configuration 29-43
To Next Page
Loading...
Need help?
General