Contents
xxxii
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Downloading a Configuration File By Using RCP B-17
Uploading a Configuration File By Using RCP B-18
Clearing Configuration Information B-18
Clearing the Startup Configuration File B-19
Deleting a Stored Configuration File B-19
Replacing and Rolling Back Configurations B-19
Understanding Configuration Replacement and Rollback B-19
Configuration Replacement and Rollback Guidelines B-20
Configuring the Configuration Archive B-21
Performing a Configuration Replacement or Rollback Operation B-22
Working with Software Images B-23
Image Location on the Switch B-23
tar File Format of Images on a Server or Cisco.com B-24
Copying Image Files By Using TFTP B-24
Preparing to Download or Upload an Image File By Using TFTP B-25
Downloading an Image File By Using TFTP B-26
Uploading an Image File By Using TFTP B-27
Copying Image Files By Using FTP B-27
Preparing to Download or Upload an Image File By Using FTP B-28
Downloading an Image File By Using FTP B-29
Uploading an Image File By Using FTP B-31
Copying Image Files By Using RCP B-32
Preparing to Download or Upload an Image File By Using RCP B-32
Downloading an Image File By Using RCP B-33
Uploading an Image File By Using RCP B-35
APPENDIX
C Unsupported Commands in Cisco IOS Release 12.2(52)EY C-1
Access Control List Commands C-2
Privileged EXEC Mode C-2
Global Configuration Mode C-2
Address Resolution Protocol (ARP) Commands C-2
Global Configuration Mode C-2
Interface Configuration Mode C-2
Hot Standby Routing Protocol (HSRP) Commands C-2
Global Configuration Mode C-2
IGMP Snooping Commands C-3
Global Configuration Mode C-3
IP Multicast Routing Commands C-3
Privileged EXEC Mode C-3
To Next Page
Loading...
