Cisco 3845 - Security Bundle Router Software Guide

Contents
vi
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Configuring NTP Associations 5-5
Configuring NTP Broadcast Service 5-6
Configuring NTP Access Restrictions 5-8
Configuring the Source IP Address for NTP Packets 5-10
Displaying the NTP Configuration 5-11
Configuring Time and Date Manually 5-11
Setting the System Clock 5-11
Displaying the Time and Date Configuration 5-12
Configuring the Time Zone 5-12
Configuring Summer Time (Daylight Saving Time) 5-13
Configuring a System Name and Prompt 5-14
Default System Name and Prompt Configuration 5-15
Configuring a System Name 5-15
Understanding DNS 5-15
Default DNS Configuration 5-16
Setting Up DNS 5-16
Displaying the DNS Configuration 5-17
Creating a Banner 5-17
Default Banner Configuration 5-17
Configuring a Message-of-the-Day Login Banner 5-18
Configuring a Login Banner 5-19
Managing the MAC Address Table 5-19
Building the Address Table 5-20
MAC Addresses and VLANs 5-20
Default MAC Address Table Configuration 5-21
Changing the Address Aging Time 5-21
Removing Dynamic Address Entries 5-21
Configuring MAC Address Change Notification Traps 5-22
Configuring MAC Address Move Notification Traps 5-24
Configuring MAC Threshold Notification Traps 5-25
Adding and Removing Static Address Entries 5-26
Configuring Unicast MAC Address Filtering 5-27
Disabling MAC Address Learning on a VLAN 5-28
Displaying Address Table Entries 5-29
Managing the ARP Table 5-30
CHAPTER 6 Configuring Synchronous Ethernet 6-1
Understanding SyncE 6-1
Reference Clocks 6-1

Cisco 3845 - Security Bundle Router Specifications

General

Brand	Cisco
Model	3845 - Security Bundle Router
Category	Switch
Language	English