34-61
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 34 Configuring MPLS, MPLS VPN, MPLS OAM, and EoMPLS
Monitoring and Maintaining MPLS and EoMPLS
show mpls ldp neighbor Display the status of LDP sessions.
show mpls ldp parameters Display current LDP parameters.
show mpls prefix-map Show the prefix map used to assign a QoS map to network prefixes that
match a standard IP access list.
show mpls traffic-eng autoroute Display tunnels announced to the IGP, including interface, destination,
and bandwidth.
show mpls traffic-eng fast-reroute database Display the contents of the Fast Reroute (FRR) database.
show mpls traffic-eng link-management Display link information about MPLS traffic engineering link
management.
show mpls traffic-eng topology Display the MPLS traffic engineering global topology as currently known
at a node.
show mpls traffic-eng tunnel Display information about MPLS traffic-engineering tunnels.
Table 34-2 Commands for Displaying MPLS and EoMPLS Information (continued)
Command Purpose