Cisco 3845 - Security Bundle Router - Page 921

Index
IN-5
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
monitoring 20-5
overview 20-1
support for 1-4
transmission timer and holdtime, setting 20-2
updates 20-2
CEF
defined 29-93
enabling 29-94
CFM
clearing 32-20
configuration errors 32-5
configuration guidelines 32-7
configuring crosscheck 32-10
configuring fault alarms 32-15
configuring port MEP 32-13
configuring static remote MEP 32-11
configuring the network 32-7
continuity check messages 32-5
crosscheck 32-5
default configuration 32-6
defined 32-1
down MEPs 32-4
EtherChannel support 32-7
fault alarms
configuring 32-15
defined 32-5
IEEE 802.1ag 32-1
IP SLAs support for 32-6
IP SLAs with endpoint discovers 32-18
loopback messages 32-5
maintenance association 32-3
maintenance domain 32-2
maintenance point 32-3
manually configuring IP SLAs ping or jitter 32-16
measuring network performance 32-6
messages
continuity check 32-5
loopback 32-5
traceroute 32-5
monitoring 32-20, 32-22
on EtherChannel port channels 32-7
port MEP, configuring 32-13
remote MEPs 32-5
SNMP traps 32-5
static RMEP, configuring 32-11
static RMEP check 32-5
traceroute messages 32-5
types of messages 32-4
up MEPs 32-4
child policies, QoS 27-18
CIDR 29-57
Cisco Configuration Engine 1-3
Cisco Data Collection MIB 25-1
Cisco Discovery Protocol
See CDP
Cisco Express Forwarding
See CEF
Cisco IOS File System
See IFS
Cisco IOS IP SLAs 31-1
Cisco Process MIB 25-1
CiscoWorks 2000 1-3, 25-4
CIST regional root
See MSTP
CIST root
See MSTP
civic location 21-2
class-based shaping
configuring 27-47
for QoS 27-18
Class-Based-Weighted-Fair-Queuing
See CBWFQ
classification
discard class 27-11
in packet headers 27-5
per-port per VLAN 27-11
QoS group 27-10
classless interdomain routing