Index
IN-7
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
automatically 3-18
preparing B-10, B-13, B-16
reasons for B-8
using FTP B-13
using RCP B-17
using TFTP B-11
guidelines for creating and using B-9
guidelines for replacing and rolling back B-20
invalid combinations when copying B-5
limiting TFTP server access 25-17, 25-18, 25-19, 25-20
obtaining with DHCP 3-9
password recovery disable considerations 8-5
replacing a running configuration B-19, B-20
rolling back a running configuration B-19, B-20
specifying the filename 3-18
system contact and location information 25-17
types and location B-9
uploading
preparing B-10, B-13, B-16
reasons for B-8
using FTP B-14
using RCP B-18
using TFTP B-11
configuration guidelines
CFM 32-7
EtherChannel 28-9
Ethernet OAM 32-24
EVCs 11-8
HSRP 30-5
MPLS OAM 34-46
MPLS TE and fast reroute 34-20
MPLS VPN 34-7
multi-VRF CE 29-82
PIM stub routing 33-12
pseudowire redundancy 34-38
QoS class maps 27-26, 27-41
REP 16-7
rollback and replacement B-20
SSM 33-15
SSM mapping 33-17
VLANs 10-6
configuration replacement B-19
configuration rollback B-19
configuration settings, saving 3-16
configure terminal command 9-6
configuring marking in input policy maps 27-32
congestion avoidance, QoS 27-2, 27-15
congestion management, QoS 27-2, 27-17
connectionless service, and VPNs 34-4
connections, secure remote 8-36
Connectivity Fault Management
See CFM
connectivity problems 35-8, 35-10
console port, connecting to 2-9
control protocol, IP SLAs 31-3
convergence
REP 16-4
CoS
classification 27-7
values 27-5
counters, clearing interface 9-23
CPU threshold notification 25-21
CPU threshold table 25-1, 25-20
CPU utilization statistics 25-20
crashinfo file 35-14
crosscheck, CFM 32-5, 32-10
cryptographic software image
Kerberos 8-31
SSH 8-36
customer edge devices 29-80
customer-edge devices
and VPNs 34-4, 34-6
MPLS 34-5
D
data collection, bulk statistics 25-20
daylight saving time 5-13
To Next Page
Loading...
