Index
IN-13
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
H
hardware limitations and Layer 3 interfaces 9-20
hello time
MSTP 14-23
STP 13-20
help, for the command line 2-3
hierarchical VPLS
See H-VPLS
history
changing the buffer size 2-5
described 2-4
disabling 2-5
recalling commands 2-5
history table, level and number of syslog messages 24-9
Hot Standby Router Protocol
See HSRP
HP OpenView 1-3
HSRP
authentication string 30-10
command-switch redundancy 1-5
configuration guidelines 30-5
configuring 30-5
default configuration 30-5
definition 30-1
monitoring 30-11
overview 30-1
priority 30-7
routing redundancy 1-8
support for ICMP redirect messages 30-11
timers 30-10
tracking 30-7
H-VPLS
defined 34-41
spoke connections 34-41
I
IBGP 34-6
IBPG 29-41
ICMP
redirect messages 29-10
support for 1-8
time-exceeded messages 35-10
traceroute 35-10
unreachable messages 26-19
unreachables and ACLs 26-20
ICMP Echo operation
configuring 31-11
IP SLAs 31-10
ICMP Router Discovery Protocol
See IRDP
IEEE 802.1ag 32-1
IEEE 802.1D
See STP
IEEE 802.1Q
and trunk ports 9-3
configuration limitations 10-10
encapsulation 10-9
native VLAN for untagged traffic 10-13
IEEE 802.1s
See MSTP
IEEE 802.1w
See RSTP
IEEE 802.3ad
See EtherChannel
IEEE 802.3ah Ethernet OAM discovery 32-1
IEEE 802.3z flow control 9-17
ifIndex values, SNMP 25-5
IFS 1-4
IGMP
configurable leave timer, described 18-5
configurable leave timer, procedures 18-9
configuring the switch
as a member of a group 33-36
statically connected member 33-41
controlling access to groups 33-37
default configuration 33-36
To Next Page
Loading...
