Index
IN-15
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
procedure 9-6
speed 9-14
counters, clearing 9-23
described 9-19
descriptive name, adding 9-19
displaying information about 9-21
flow control 9-17
management 1-3
monitoring 9-21
naming 9-19
physical, identifying 9-6
range of 9-7
restarting 9-23
shutting down 9-23
status 9-21
supported 9-6
types of 9-1
interfaces range macro command 9-8
interface types 9-6
Interior Gateway Protocol
See IGP
Intermediate System-to-Intermediate System
See IS-IS
internal BGP
See IBGP
internal neighbors, BGP 29-45
Internet Control Message Protocol
See ICMP
Internet Group Management Protocol
See IGMP
inter-VLAN routing 1-8, 29-1
inventory management TLV 21-6
IP ACLs
for QoS classification 27-9
implicit deny 26-9, 26-13
implicit masks 26-9
named 26-14
undefined 26-20
IP addresses
classes of 29-4
default configuration 29-3
discovering 5-30
for IP routing 29-3
MAC address association 29-7
monitoring 29-16
IP broadcast address 29-14
ip cef distributed command 29-93
IP directed broadcasts 29-12
ip igmp profile command 18-14
IP information
assigned
manually 3-15
through DHCP-based autoconfiguration 3-4
default configuration 3-3
IP multicast routing
addresses
all-hosts 33-2
all-multicast-routers 33-2
host group address range 33-2
administratively-scoped boundaries, described 33-43
and IGMP snooping 18-1
Auto-RP
adding to an existing sparse-mode cloud 33-24
benefits of 33-23
clearing the cache 33-45
configuration guidelines 33-10
filtering incoming RP announcement
messages
33-26
overview 33-6
preventing candidate RP spoofing 33-26
preventing join messages to false RPs 33-25
setting up in a new internetwork 33-24
using with BSR 33-31
bootstrap router
configuration guidelines 33-10
configuring candidate BSRs 33-29
configuring candidate RPs 33-30
defining the IP multicast boundary 33-29
To Next Page
Loading...
