Cisco 3845 - Security Bundle Router Software Guide

4-10
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 4 Configuring Cisco IOS Configuration Engine
Configuring Cisco IOS Agents
Step 8
template name [ ... name] Specify the list of CNS connect templates in the CNS connect
profile to be applied to the switch configuration. You can
specify more than one template.
Step 9
Repeat Steps 7 to 8 to specify more interface parameters and
CNS connect templates in the CNS connect profile.
Step 10
exit Return to global configuration mode.
Step 11
hostname name Enter the hostname for the switch.
Step 12
ip route network-number (Optional) Establish a static route to the Configuration Engine
whose IP address is network-number.
Step 13
cns id interface num {dns-reverse | ipaddress |
mac-address} [event] [image]
or
cns id {hardware-serial | hostname | string
string | udi} [event] [image]
(Optional) Set the unique EventID or ConfigID used by the
Configuration Engine.
• For interface num, enter the type of interface–for example,
ethernet, group-async, loopback, or virtual-template. This
setting specifies from which interface the IP or MAC
address should be retrieved to define the unique ID.
• For {dns-reverse | ipaddress | mac-address}, enter
dns-reverse to retrieve the hostname and assign it as the
unique ID, enter ipaddress to use the IP address, or enter
mac-address to use the MAC address as the unique ID.
• (Optional) Enter event to set the ID to be the event-id value
used to identify the switch.
• (Optional) Enter image to set the ID to be the image-id
value used to identify the switch.
Note If both the event and image keywords are omitted, the
image-id value is used to identify the switch.
• For {hardware-serial | hostname| string string | udi},
enter hardware-serial to set the switch serial number as
the unique ID, enter hostname (the default) to select the
switch hostname as the unique ID, enter an arbitrary text
string for string string as the unique ID, or enter udi to set
the unique device identifier (UDI) as the unique ID.
Command Purpose

Cisco 3845 - Security Bundle Router Specifications

General

Brand	Cisco
Model	3845 - Security Bundle Router
Category	Switch
Language	English