Index
IN-26
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
port-channel
See EtherChannel
Port Fast
described 15-2
enabling 15-5
support for 1-5
port membership modes, VLAN 10-4
port priority
MSTP 14-19
STP 13-16
ports
access 9-3
blocking 19-5
REP 16-6
routed 9-3
static-access 10-4, 10-8
switch 9-2
trunks 10-4, 10-9
VLAN assignments 10-8
port shaping
configuring 27-48
described 27-18
port types 9-2
power 21-6
power management TLV 21-6
preempt delay time, REP 16-5
preemption, default configuration 17-7
preemption delay, default configuration 17-7
preferential treatment of traffic
See QoS
prefix lists, BGP 29-52
preventing unauthorized access 8-1
primary edge port, REP 16-4
primary links 17-2
primary pseudowire 34-38
priority, HSRP 30-7
priority command
for QoS scheduling 27-17
for strict priority queuing 27-20
priority queues
described 27-20
for QoS scheduling 27-17
privileged EXEC mode 2-2
privilege levels
changing the default for lines 8-9
exiting 8-9
logging into 8-9
overview 8-2, 8-7
setting a command with 8-8
protocol-dependent modules, EIGRP 29-34
Protocol-Independent Multicast Protocol
See PIM
provider edge devices 29-80
and MPLS 34-8
and MPLS labels 34-4
in VPNs 34-6
proxy ARP
configuring 29-9
definition 29-7
with IP routing disabled 29-10
proxy reports 17-3
pseudowire
class 34-33
L2VPN interworking 34-34
pseudowire redundancy 34-37
configuration guidelines 34-38
monitoring 34-40
pseudowires, defined 34-37
pseudowire switchover, manually configuring 34-40
PVST+
802.1Q trunking interoperability 13-10
described 13-9
instances supported 13-9
Q
QoS
basic model 27-2