Cisco 7800 Series

DescriptionItem
Identifier of a device connected to this port discovered by CDP
protocol.
CDP Neighbor Device ID
Identifier of a device connected to this port discovered by CDP
protocol using IP.
CDP Neighbor IP Address
Identifier of a device connected to this port discovered by CDP
protocol using IPv6.
CDP Neighbor IPv6 Address
Identifier of a device connected to this port discovered by CDP
protocol.
CDP Neighbor Port
Cause of the last reset of the phoneRestart Cause: One of these values:
•
Hardware Reset (Power-on reset)
•
Software Reset (memory controller
also reset)
•
Software Reset (memory controller
not reset)
•
Watchdog Reset
•
Unknown
Link state and connection of the PC port (for example, Auto 100
Mb Full-Duplex means that the PC port is in a link-up state and
has auto-negotiated a full-duplex, 100-Mbps connection)
Port 1
Link state and connection of the Network portPort 2
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
182
Cisco IP Phone Status