Cisco 7800 Series Administrator's Guide

Set IP Address Field 37
Set Subnet Mask Field 38
Set Default Router Field 38
Set DNS Server Fields 38
Set Alternate TFTP Field 39
Set TFTP Server 1 Field 39
Set TFTP Server 2 Field 39
Verify Phone Startup 40
Configure Phone Services for Users 40
CHAPTER 5 Cisco Unified Communications Manager Phone Setup 43
Set Up Cisco IP Phone 43
Determine Phone MAC Address 47
Phone Addition Methods 48
Add Phones Individually 48
Add Phones Using BAT Phone Template 49
Add Users to Cisco Unified Communications Manager 49
Add a User from an External LDAP Directory 50
Add User Directly to Cisco Unified Communications Manager 50
Add User to End User Group 51
Associate Phones with Users 52
Surviveable Remote Site Telephony 52
CHAPTER 6 Self Care Portal Management 55
Self Care Portal Overview 55
Set Up User Access to the Self Care Portal 56
Customize the Self Care Portal Display 56
PART III Hardware and Accessory Installation 57
CHAPTER 7 Cisco IP Phone Accessories 59
Connect the Footstand 59
Headsets 59
Audio Quality 60
Analog Headsets 60
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
v
Contents

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)