Cisco 7906G Administration Guide

4-23
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Ta b l e 4-11 Security Configuration Menu Options
Option Description To Change
PC Port Disabled
(applies to 7911G
only)
Indicates whether the access port on the
phone is enabled (No) or disabled
(Yes).
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
GARP Enabled Indicates whether the phone learns
MAC addresses from Gratuitous ARP
responses. Disabling the phone ability
to accept Gratuitous ARP will prevent
applications that use this mechanism to
monitor and record voice streams from
working. If voice monitoring is not
desired, set this option to No
(disabled).
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Vo i c e V L A N
Enabled
Indicates whether the phone allows a
device attached to the access port to
access the Voice VLAN. Setting this
option to No (disabled) prevents the
attached PC from sending and
receiving data on the Voice VLAN.
This setting also prevents the PC from
receiving data sent and received by the
phone. Set this setting to Yes (enabled)
if an application that requires
monitoring of the phone traffic is
running on the PC. These applications
include monitoring and recording
applications and network monitoring
software.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Web Access
Enabled
Indicates whether web access is
enabled (Yes) or disabled (No) for the
phone.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English