Cisco 7906G Administration Guide

5-5
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Caller ID Blocking Allows a user to block their phone number
or e-mail address from phones that have
caller identification enabled.
Refer to the
Cisco
Unified CallManager
Administration Guide.
Cisco Call Back Allows a user to receive call back
notification on a Cisco
Unified IP Phone
when a called party’s line becomes
available.
Refer to
Cisco
Unified CallManager
Features and Services Guide for
configuration instructions.
Conference Initiates an ad hoc conference and then
conferences in other participants one at a
time.
• Refer to
Cisco
Unified CallManager
Administration Guide.
• Refer to
Cisco
Unified CallManager
System Guide.
Direct transfer Joins two established calls (calls that are on
hold or in connected state) into one call and
drops the feature initiator from the call.
Does not initiate a consultation call and
does not put the active call on hold.
For more information, refer to the
Cisco
Unified CallManager
System Guide,
Cisco
Unified IP Phones chapter.
Do Not Disturb
(DND)
Allows a user to block incoming calls on the
phone with a busy tone. Valid values
include:
• User Controlled (default): a user can
turn DND on and off on the phone.
• Admin Controlled: a user can not turn
DND on or off on the phone.
Refer to the
Cisco
Unified CallManager
Administration Guide, SIP Profile
Configuration chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English