Cisco 7906G

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
8-8
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
CallManager 1–5 Host names or IP addresses, in prioritized order, of the
Cisco
Unified CallManager servers with which the
phone can register. An item can also show the IP
address of an SRST router that is capable of providing
limited Cisco
Unified CallManager functionality, if
such a router is available.
For an available server, an item will show the
Cisco
Unified CallManager server IP address and one
of the following states:
• Active—Cisco Unified CallManager server from
which the phone is currently receiving
call-processing services.
• Standby—Cisco Unified CallManager server to
which the phone switches if the current server
becomes unavailable.
• Blank—No current connection to this
Cisco
Unified CallManager server.
An option may also include the Survivable Remote
Site Telephony (SRST) designation, which indicates
an SRST router capable of providing
Cisco
Unified CallManager functionality with a
limited feature set. This router assumes control of call
processing if all other Cisco
Unified CallManager
servers become unreachable. The SRST
Cisco
Unified CallManager always appears last in the
list of servers, even if it is active. You configure the
SRST router address in the Device Pool section in
Cisco
Unified CallManager.
Information URL URL of the help text that appears on the phone.
Directories URL URL of the server from which the phone obtains
directory information.
Messages URL URL of the server from which the phone obtains
message services.
Table 8-2 Network Configuration Area Items (continued)
Item Description