Cisco 7906G Administration Guide

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
8-10
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
PC Port Configuration
(applies to 7911G only)
Speed and duplex of the switch port, where:
• A—Auto Negotiate
• 10H—10-BaseT/half duplex
• 10F—10-BaseT/full duplex
• 100H—100-BaseT/half duplex
• 100F—100-BaseT/full duplex
• No Link—No connection to the PC port
TFTP Server 2 Backup TFTP server that the phone uses if the primary
TFTP server is unavailable.
User Locale User locale associated with the phone user. Identifies a
set of detailed information to support users, including
language, font, date and time formatting, and
alphanumeric keyboard text information.
Network Locale Network locale associated with the phone user.
Identifies a set of detailed information to support the
phone in a specific location, including definitions of
the tones and cadences used by the phone.
User Locale Version Version of the user locale loaded on the phone.
Network Locale
Ve r s i o n
Version of the network locale loaded on the phone.
PC Port Disabled
(applies to 7911G only)
Indicates whether the PC port on the phone is enabled
or disabled.
Speaker Enabled Indicates whether the speakerphone is enabled on the
phone.
Group Listen Enables both the handset and speaker to be active at the
same time, so that one user can talk into the handset
while other users listen over the speaker.
GARP Enabled Indicates whether the phone learns MAC addresses
from Gratuitous ARP responses.
Table 8-2 Network Configuration Area Items (continued)
Item Description

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English