B-1
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
APPENDIX
B
Feature Support by Protocol for
Cisco Unified IP Phone 7906G and
7911G
This appendix provides information about feature support for the
Cisco
Unified IP Phone 7906G and 7911G using the SCCP or SIP protocol with
Cisco
Unified CallManager Release 5.1.
In most cases, the Cisco Unified IP Phone 7906G and 7911G supports similar
features whether on SCCP or SIP.
Table B-1 provides a high-level overview of
calling features and their support by protocol. This table focuses primarily on
end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and
feature use, refer to Cisco Unified IP Phone 7906G and 7911G for Cisco Unified
CallManager 5.1 Phone Guide, which is available at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
The specific sections that describe the features in the phone user guide are
referenced in
Table B-1.