Cisco 8832 - Page 104

DescriptionDefaultField Type
Or Choices
Field Name
Controls the use of TLS 1.2 for a web server
connection.
• Disabled—A phone configured for TLS1.0, TLS
1.1, or TLS1.2 can function as a HTTPs server.
• Enabled—Only a phone configured for TLS1.2
can function as a HTTPs server.
EnabledDisabled
Enabled
Disable TLS 1.0 and
TLS 1.1 for WebAccess
Defines the days that the backlight does not turn on
automatically at the time specified in the Backlight On
Time field.
Choose the day or days from the drop-down list. To
choose more than one day, Ctrl+click each day that
you want.
See Set Up Power Save.
Days of the weekDays Backlight Not
Active
Defines the time each day that the backlight turns on
automatically (except on the days specified in the
Backlight Display Not Active field).
Enter the time in this field in 24 hour format, where
0:00 is midnight.
For example, to automatically turn the backlight on at
07:00 a.m. (0700), enter 07:00. To turn the backlight
on at 02:00 p.m. (1400), enter 14:00.
If this field is blank, the backlight automatically turns
on at 0:00.
See Set Up Power Save.
hh:mmBacklight On Time
Defines the length of time that the backlight remains
on after turning on at the time specified in the
Backlight On Time field.
For example, to keep the backlight on for 4 hours and
30 minutes after it turns on automatically, enter 04:30.
If this field is blank, the phone turns off at the end of
the day (0:00).
If Backlight On Time is 0:00 and the backlight on
duration is blank (or 24:00), the backlight does not
turn off.
See Set Up Power Save.
hh:mmBacklight On Duration
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
94
Cisco IP Conference Phone Administration
Product Specific Configuration