Cisco 8832 - Page 106

DescriptionDefaultField Type
Or Choices
Field Name
Determines when the phone automatically turns on for
the days that are in the Enable Power Save Plus field.
Enter the time in this field in 24-hour format, where
00:00 is midnight.
For example, to automatically power up the phone at
07:00 a.m. (0700), enter 07:00. To power up the phone
at 02:00 p.m. (1400), enter 14:00.
The default value is blank, which means 00:00.
The Phone On Time must be at least 20 minutes later
than the Phone Off Time. For example, if the Phone
Off Time is 07:00, the Phone On Time must be no
earlier than 07:20.
See Set Up EnergyWise.
hh:mmPhone On Time
Defines the time of day that the phone powers down
for the days that are selected in the Enable Power Save
Plus field. If the Phone On Time and the Phone Off
Time fields contain the same value, the phone does
not power down.
Enter the time in this field in 24-hour format, where
00:00 is midnight.
For example, to automatically power down the phone
at 7:00 a.m. (0700), enter 7:00. To power down the
phone at 2:00 p.m. (1400), enter 14:00.
The default value is blank, which means 00:00.
The Phone On Time must be at least 20 minutes later
than the Phone Off Time. For example, if the Phone
Off Time is 7:00, the Phone On Time must be no
earlier than 7:20.
See Set Up EnergyWise.
hh:mmPhone Off Time
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
96
Cisco IP Conference Phone Administration
Product Specific Configuration