Cisco ASA Series User Manual

1-21
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Inspection for Voice and Video Protocols
SIP Inspection
To specify traffic that should not match the class map, use the match not command. For example, if the
match not command specifies the string “example.com,” then any traffic that includes “example.com”
does not match the class map.
For the traffic that you identify in this class map, you can specify actions such as drop-connection, reset,
and/or log the connection in the inspection policy map.
If you want to perform different actions for each match command, you should identify the traffic directly
in the policy map.
a. Create the class map by entering the following command:
hostname(config)# class-map type inspect sip [match-all | match-any] class_map_name
hostname(config-cmap)#
Where the class_map_name is the name of the class map. The match-all keyword is the default, and
specifies that traffic must match all criteria to match the class map. The match-any keyword
specifies that the traffic matches the class map if it matches at leX( The CLI enters class-map
configuration mode, where you can enter one or more match commands.
b. (Optional) To add a description to the class map, enter the following command:
hostname(config-cmap)# description string
Where string is the description of the class map (up to 200 characters).
c. (Optional) To match a called party, as specified in the To header, enter the following command:
hostname(config-cmap)# match [not] called-party regex {class class_name | regex_name}
Where the regex regex_name argument is the regular expression you created in Step 1. The class
regex_class_name is the regular expression class map you created in Step 2.
d. (Optional) To match a calling party, as specified in the From header, enter the following command:
hostname(config-cmap)# match [not] calling-party regex {class class_name | regex_name}
Where the regex regex_name argument is the regular expression you created in Step 1. The class
regex_class_name is the regular expression class map you created in Step 2.
e. (Optional) To match a content length in the SIP header, enter the following command:
hostname(config-cmap)# match [not] content length gt length
Where length is the number of bytes the content length is greater than. 0 to 65536.
f. (Optional) To match an SDP content type or regular expression, enter the following command:
hostname(config-cmap)# match [not] content type {sdp | regex {class class_name |
regex_name}}
Where the regex regex_name argument is the regular expression you created in Step 1. The class
regex_class_name is the regular expression class map you created in Step 2.
g. (Optional) To match a SIP IM subscriber, enter the following command:
hostname(config-cmap)# match [not] im-subscriber regex {class class_name | regex_name}
Where the regex regex_name argument is the regular expression you created in Step 1. The class
regex_class_name is the regular expression class map you created in Step 2.
h. (Optional) To match a SIP via header, enter the following command:
hostname(config-cmap)# match [not] message-path regex {class class_name | regex_name}

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model