Cisco ASA Series User Manual

CHAPTER
1-1
Cisco ASA Series CLI Configuration Guide
1
Completing Interface Configuration
(Transparent Mode)
This chapter includes tasks to complete the interface configuration for all models in transparent firewall
mode.
This chapter includes the following sections:
• Information About Completing Interface Configuration in Transparent Mode, page 1-1
• Licensing Requirements for Completing Interface Configuration in Transparent Mode, page 1-3
• Guidelines and Limitations, page 1-5
• Default Settings, page 1-7
• Completing Interface Configuration in Transparent Mode, page 1-7
• Turning Off and Turning On Interfaces, page 1-19
• Monitoring Interfaces, page 1-19
• Configuration Examples for Interfaces in Transparent Mode, page 1-20
• Feature History for Interfaces in Transparent Mode, page 1-21
Note For multiple context mode, complete the tasks in this section in the context execution space. Enter the
changeto context name command to change to the context you want to configure.
Information About Completing Interface Configuration in
Transparent Mode
This section includes the following topics:
• Bridge Groups in Transparent Mode, page 1-2
• Security Levels, page 1-2

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model