Cisco ASA Series User Manual

1-2
Cisco ASA Series CLI Configuration Guide
Chapter 1 Troubleshooting
Capturing Packets
of less network traffic and fewer users. Debugging during these periods decreases the likelihood that
increased debug command processing overhead will affect system use. To enable debugging messages,
see the debug commands in the command reference.
Capturing Packets
Capturing packets may be useful when troubleshooting connectivity problems or monitoring suspicious
activity. We recommend that you contact Cisco TAC if you want to use the packet capture feature.
To capture packets, enter the following command:

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model