Cisco ASA Series User Manual

1-5
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Network Admission Control
Viewing the NAC Policies on the Security Appliance
ASA support for NAC Framework is limited to remote access IPsec and WebVPN client sessions. The
NAC Framework configuration supports only single mode.
NAC on the ASA does not support Layer 3 (non-VPN) traffic and IPv6 traffic.
Viewing the NAC Policies on the Security Appliance
Before configuring the NAC policies to be assigned to group policies, we recommend that you view any
that may already be set up on the ASA. Because the default configuration does not contain NAC policies,
entering this command is a useful way to determine whether anyone has added any. If you, you may
decide that policies already configured are suitable and disregard the section on configuring a NAC
policy.

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model