Cisco ASA Series User Manual

1-8
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Filtering Services
Filtering URLs and FTP Requests with an External Server
Identifying the Filtering Server
You can identify up to four filtering servers per context. The ASA uses the servers in order until a server
responds. In single mode, a maximum of 16 of the same type of filtering servers are allowed. You can
only configure a single type of server (Websense or Secure Computing SmartFilter) in your configuration.
Note You must add the filtering server before you can configure filtering for HTTP or HTTPS with the filter
command. If you remove the filtering servers from the configuration, then all filter commands are also
removed.
To specify the external filtering server, enter the following command:
Command Purpose
Choose from the following options:

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model