Cisco ASA Series User Manual

1-24
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring the ASA IPS Module
Managing the ASA IPS module
To reset the module password to the default of cisco, perform the following steps.
Detailed Steps
Reloading or Resetting the Module
To reload or reset the module, enter one of the following commands at the ASA CLI.
Detailed Steps
Command Purpose
For a physical module (for example, the ASA 5585-X):
hw-module module 1 password-reset
For a software module (for example, the ASA 5545-X):
sw-module module ips password-reset
Example:
hostname# hw-module module 1 password-reset
Resets the module password to cisco.
Command Purpose
For a physical module (for example, the ASA
5585-X):
hw-module module 1 reload
For a software module (for example, the ASA
5545-X):
sw-module module ips reload
Example:
hostname# hw-module module 1 reload
Reloads the module software.
For a physical module:
hw-module module 1 reset
For a software module:
sw-module module ips reset
Example:
hostname# hw-module module 1 reset
Performs a reset, and then reloads the module.

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model