Cisco ASA Series User Manual

1-28
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Digital Certificates
Configuring Digital Certificates
Configuring the Issuer Name
To configure the certificate issuer name, perform the following commands:
Configuring the CA Certificate Lifetime
To configure the local CA server certificate lifetime, perform the following commands:
Command Purpose
Step 1
crypto ca server
Example:
hostname (config)# crypto ca server
Enters local ca server configuration mode. Allows
you to configure and manage a local CA.
Step 2
issuer-name DN-string
Example:
hostname (config-ca-server)# issuer-name
CN=xx5520,CN=30.132.0.25,ou=DevTest,ou=QA,O=ABC
Systems
Specifies the local CA certificate subject name. The
configured certificate issuer name is both the subject
name and issuer name of the self-signed local CA
certificate, as well as the issuer name in all issued
client certificates and in the issued CRL. The default
issuer name in the local CA is in the format,
hostname.domainname.
Note You cannot change the issuer name value after
the local CA is first enabled.
Command Purpose
Step 1
crypto ca server
Example:
hostname (config)# crypto ca server
Enters local ca server configuration mode. Allows
you to configure and manage a local CA.

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model