Cisco ASA Series User Manual

1-7
Cisco ASA Series CLI Configuration Guide
Chapter 1 Defining Route Maps
Feature History for Route Maps
Feature History for Route Maps
Table 1-1 lists each feature change and the platform release in which it was implemented.
Table 1-1 Feature History for Route Maps
Feature Name
Platform
Releases Feature Information
Route maps 7.0(1) We introduced this feature.
We introduced the following command: route-map.
Enhanced support for static and dynamic route
maps
8.0(2) Enhanced support for dynamic and static route maps was
added.
Support for Stateful Failover of dynamic
routing protocols (EIGRP, OSPF, and RIP) and
debugging of general routing-related operations
8.4(1) We introduced the following commands: debug route,
show debug route.
We modified the following command: show route.
Dynamic Routing in Multiple Context Mode 9.0(1) Route maps are supported in multiple context mode.

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model