Cisco ASA Series

1-16
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Filtering Services
Monitoring Filtering Statistics
STATUS_REQUEST 1609 1601
LOOKUP_REQUEST 1526 1526
LOG_REQUEST 0 NA
Errors:
-------
RFC noncompliant GET method 0
URL buffer update failure 0
The following is sample output from the show url-block command:
hostname# show url-block
url-block url-mempool 128
url-block url-size 4
url-block block 128
The following is sample output from the show url-block block statistics command:
hostname# show url-block block statistics
URL Pending Packet Buffer Stats with max block 128
-----------------------------------------------------
Cumulative number of packets held: 896
Maximum number of packets held (per URL): 3
Current number of packets held (global): 38
Packets dropped due to
exceeding url-block buffer limit: 7546
HTTP server retransmission: 10
Number of packets released back to client: 0
The following is sample output from the show url-cache stats command:
hostname# show url-cache stats
URL Filter Cache Stats
----------------------
Size : 128KB
Entries : 1724
In Use : 456
Lookups : 45
Hits : 8
This shows how the cache is used.
The following is sample output from the show perfmon command:
hostname# show perfmon
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 0/s 2/s
TCP Conns 0/s 2/s
UDP Conns 0/s 0/s
URL Access 0/s 2/s
URL Server Req 0/s 3/s
TCP Fixup 0/s 0/s
TCPIntercept 0/s 0/s
HTTP Fixup 0/s 3/s
FTP Fixup 0/s 0/s
AAA Authen 0/s 0/s
AAA Author 0/s 0/s
AAA Account 0/s 0/s
The following is sample output from the show filter command:
hostname# show filter
filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0