EasyManuals Logo

Cisco ASA Series User Manual

Cisco ASA Series
2164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1606 background imageLoading...
Page #1606 background image
1-14
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring L2TP over IPsec
Configuring L2TP over IPsec
Detailed CLI Configuration Steps
Command Purpose
Step 1
crypto ipsec ike_version transform-set transform_name
ESP_Encryption_Type ESP_Authentication_Type
Example:
crypto ipsec ikev1 transform-set my-transform-set-ikev1
esp-des esp-sha-hmac
Creates a transform set with a specific ESP
encryption type and authentication type.
Step 2
crypto ipsec ike_version transform-set trans_name mode
transport
Example:
crypto ipsec ikev1 transform-set my-transform-set-ikev1 mode
transport
Instructs IPsec to use transport mode rather
than tunnel mode.
Step 3
vpn-tunnel-protocol tunneling_protocol
Example:
hostname(config)# group-policy DfltGrpPolicy attributes
hostname(config-group-policy)# vpn-tunnel-protocol
l2tp-ipsec
Specifies L2TP/IPsec as the vpn tunneling
protocol.
Step 4
dns value [none | IP_primary [IP_secondary]
Example:
hostname(config)# group-policy DfltGrpPolicy attributes
hostname(config-group-policy)# dns value 209.165.201.1
209.165.201.2
(Optional) Instructs the adaptive security
appliance to send DNS server IP addresses
to the client for the group policy.
Step 5
wins-server value [none | IP_primary [IP_secondary]]
Example:
hostname(config)# group-policy DfltGrpPolicy attributes
hostname (config-group-policy)# wins-server value
209.165.201.3 209.165.201.4
(Optional) Instructs the adaptive security
appliance to send WINS server IP addresses
to the client for the group policy.
Step 6
ip local pool pool_name starting_address-ending_address
mask subnet_mask
Example:
hostname(config)# ip local pool sales_addresses
10.4.5.10-10.4.5.20 mask 255.255.255.0
(Optional) Creates an IP address pool.
Step 7
address-pool pool_name
Example:
hostname(config)# tunnel-group DefaultRAGroup
general-attributes
hostname(config-tunnel-general)# address-pool
sales_addresses
(Optional) Associates the pool of IP
addresses with the connection profile
(tunnel group).

Table of Contents

Other manuals for Cisco ASA Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASA Series and is the answer not in the manual?

Cisco ASA Series Specifications

General IconGeneral
ModelASA 5505
InterfacesVaries by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High AvailabilityActive/Standby or Active/Active (varies by model)
Power SupplyVaries by model
Form FactorVaries by model
Operating SystemCisco ASA Software
IPsec VPNSupported
SSL VPNSupported
IPS ThroughputVaries by model

Related product manuals