Cisco ASA Series User Manual

1-17
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Network Admission Control
Changing Global NAC Framework Settings
Step 7
(Optional)
no eou max-retry
Example:
hostname(config)# no eou max-retry
hostname(config)#
Changes the maximum number of retransmission
retries to its default value.
Step 8
eou timeout hold-period seconds
Example:
hostname(config)# eou timeout hold-period 120
hostname(config)#
Changes the session reinitialization timer. When the
retransmission retry counter matches the max-retry
value, the ASA terminates the EAP over UDP
session with the remote host and starts the hold
timer. When the hold timer equals n seconds, the
ASA establishes a new EAP over UDP session with
the remote host. By default, the maximum number of
seconds to wait before establishing a new session is
180 seconds.
seconds is a value in the range 60 to 86400.
Changes the wait period before initiating a new EAP
over UDP association to 120 seconds
Step 9
(Optional)
no eou timeout hold-period
Example:
hostname(config)# no eou timeout hold-period
hostname(config)#
Changes the session reinitialization to its default
value.
Command Purpose

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model