Cisco ASA Series User Manual

1-6
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring AnyConnect Host Scan
Installing and Enabling Host Scan on the ASA
Prerequisites
Log on to the ASA and enter global configuration mode. In global configuration mode, the ASA displays
this prompt: hostname(config)#
Detailed Steps
Command Purpose
Step 1
group-policy name internal
Example:
hostname(config)# group-policy PostureModuleGroup
internal
Adds an internal group policy for Network Client Access
Step 2
group-policy name attributes
Example:
hostname(config)# group-policy PostureModuleGroup
attributes
Edits the new group policy. After entering the command,
you receive the prompt for group policy configuration
mode, hostname(config-group-policy)#.
Step 3
webvpn
Example:
hostname(config-group-policy)# webvpn
Enters group policy webvpn configuration mode. After
you enter the command, the ASA returns this prompt:
hostname(config-group-webvpn)#

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model