Cisco ASA Series User Manual

1-6
Cisco ASA Series CLI Configuration Guide
Chapter 1 Managing Software and Configurations
Command Purpose
Step 1
more system:running-config
Example:
primary# more system:running-config
(If there is a configuration migration) The output shows the
configuration on the terminal so that you can back up your
configuration. Copy the output from this command, then paste the
configuration in to a text file.
Note If you are upgrading from a pre-8.3 version, then the
running configuration is backed up automatically.
For other methods of backing up, see the configuration guide.
Step 2
copy tftp://server[/path]/asa_image_name
{disk0:/ | disk1:/}[path/]asa_image_name
Example:
primary# copy
tftp://10.1.1.1/asa901-smp-k9.bin
disk0:/asa901-smp-k9.bin
Copies the ASA software to the primary unit flash memory. For
other methods than TFTP, see the copy command.
Step 3
failover exec mate copy /noconfirm
tftp://server[/path]/filename {disk0:/ |
disk1:/}[path/]filename
Example:
primary# failover exec mate copy
/noconfirm
tftp://10.1.1.1/asa901-smp-k9.bin
disk0:/asa901-smp-k9.bin
Copies the software to the secondary unit; be sure to specify the
same path as for the primary unit.
Step 4
copy tftp://server[/path]/asdm_image_name
{disk0:/ | disk1:/}[path/]asdm_image_name
Example:
primary# copy tftp://10.1.1.1/asdm-701.bin
disk0:/asdm-701.bin
Copies the ASDM image to the primary unit flash memory.
Step 5
failover exec mate copy /noconfirm
tftp://server[/path]/asdm_image_name
{disk0:/ | disk1:/}[path/]asdm_image_name
Example:
primary# failover exec mate copy
/noconfirm tftp://10.1.1.1/asdm-701.bin
disk0:/asdm-701.bin
Copies the ASDM image to the secondary unit; be sure to specify
the same path as for the active unit.
Step 6
failover active group 1
failover active group 2
Example:
primary# failover active group 1
primary# failover active group 2
Makes both failover groups active on the primary unit.
Step 7
configure terminal
Example:
primary(config)# configure terminal
If you are not already in global configuration mode, accesses
global configuration mode.

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model