Cisco ASA Series User Manual

1-39
Cisco ASA Series CLI Configuration Guide
Appendix 1 Configuring an External Server for Authorization and Authentication
Configuring an External TACACS+ Server
.
Table 1-11 Supported TACACS+ Accounting Attributes
Attribute Description
bytes_in Specifies the number of input bytes transferred during this connection (stop
records only).
bytes_out Specifies the number of output bytes transferred during this connection (stop
records only).
cmd Defines the command executed (command accounting only).
disc-cause Indicates the numeric code that identifies the reason for disconnecting (stop
records only).
elapsed_time Defines the elapsed time in seconds for the connection (stop records only).
foreign_ip Specifies the IP address of the client for tunnel connections. Defines the address
on the lowest security interface for cut-through-proxy connections.
local_ip Specifies the IP address that the client connected to for tunnel connections. Defines
the address on the highest security interface for cut-through-proxy connections.
NAS port Contains a session ID for the connection.
packs_in Specifies the number of input packets transferred during this connection.
packs_out Specifies the number of output packets transferred during this connection.
priv-level Set to the user privilege level for command accounting requests or to 1 otherwise.
rem_iddr Indicates the IP address of the client.
service Specifies the service used. Always set to “shell” for command accounting only.
task_id Specifies a unique task ID for the accounting transaction.
username Indicates the name of the user.

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model