Index
IN-29
Cisco ASA Series CLI Configuration Guide
TLS Proxy
applications supported by ASA
50-3
Cisco Unified Presence architecture 54-1
configuring for Cisco Unified Presence 54-8
licenses 50-4, 52-5, 53-6, 54-7, 55-7
tocken bucket 57-2
toolbar, floating, WebVPN 77-84
traffic shaping
overview
57-4
transform set
creating
72-1, 72-10
definition 67-19
transmit queue ring limit 57-2, 57-3
transparent firewall
about
4-2
ARP inspection
about
4-10
enabling 4-12
static entry 4-11
DHCP packets, allowing 41-5
guidelines 4-7
H.323 guidelines 4-4
HSRP 4-3
MAC address timeout 4-15
MAC learning, disabling 4-15
management IP address 13-8
multicast traffic 4-3
packet handling 41-5
static bridge entry 4-15
unsupported features 4-8
VRRP 4-3
transparent mode
NAT
32-11
troubleshooting
H.323
47-9
H.323 RAS 47-11
phone proxy 51-28
SIP 47-24
troubleshooting SNMP 82-24
trunk, 802.1Q 10-31
trunk ports 11-9
Trusted Flow Acceleration
failover
68-8
modes 4-6, 4-11, 4-14, 9-7, 41-7, 68-8
trustpoint 40-3
trustpoint, ASA 5505 client 74-7
trust relationship
Cisco Unified Mobility
53-5
Cisco Unified Presence 54-4
tunnel
ASA 5505 as Easy VPN client
74-5
IPsec 67-19
security appliance as a tunnel endpoint 67-2
tunnel group
ASA 5505 as Easy VPN client
74-7
configuring 70-6
creating 70-8
default 67-18, 70-1, 70-2
default, remote access, configuring 70-7
default LAN-to-LAN, configuring 70-17
definition 70-1, 70-2
general parameters 70-3
inheritance 70-1
IPSec parameters 70-4
LAN-to-LAN, configuring 70-17
name and type 70-8
remote access, configuring 72-11
remote-access, configuring 70-8
tunnel-group
general attributes
70-3
tunnel-group ISAKMP/IKE keepalive settings 70-4
tunneling, about 67-1
tunnel mode 68-2
twice NAT
about
32-14
comparison with network object NAT 32-13
configuring 34-1
dynamic NAT 34-7
To Next Page
Loading...
Need help?
General
