Cisco ASA Series User Manual

1-12
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Network Object NAT
Configuring Network Object NAT
Step 3
{host ip_address | subnet subnet_address
netmask | range ip_address_1 ip_address_2}
Example:
hostname(config-network-object)# subnet
10.2.1.0 255.255.255.0
If you are creating a new network object, defines the real IP
address(es) (IPv4 or IPv6) that you want to translate.
Command Purpose

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model