Cisco ASA Series User Manual

1-19
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Digital Certificates
Configuring Digital Certificates
Step 3
crypto ca import trustpoint certificate
Example:
hostname (config)# crypto ca import Main certificate
% The fully-qualified domain name in the certificate
will be: securityappliance.example.com
Enter the base 64 encoded certificate.
End with a blank line or the word “quit” on a line
by itself
[ certificate data omitted ]
quit
INFO: Certificate successfully imported
Imports each certificate you receive from the CA.
Requests that you paste the certificate to the terminal
in base-64 format.
Step 4
show crypto ca server certificate
Example:
hostname(config)# show crypto ca server certificate
Main
Verifies that the enrollment process was successful by
displaying certificate details issued for the ASA and
the CA certificate for the trustpoint.
Step 5
write memory
Example:
hostname(config)# write memory
Saves the running configuration.
Repeat these steps for each trustpoint that you
configure for manual enrollment.
Command Purpose

Cisco ASA Series Specifications

General

Model	ASA 5505
Interfaces	Varies by model (Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, etc.)
High Availability	Active/Standby or Active/Active (varies by model)
Power Supply	Varies by model
Form Factor	Varies by model
Operating System	Cisco ASA Software
IPsec VPN	Supported
SSL VPN	Supported
IPS Throughput	Varies by model