Cisco ASR 5000 Series Product Overview ▄
Product Specifications
The following information is located in this section:
Licenses
Hardware Requirements
Operating System Requirements
Licenses
The PDG/TTG is a licensed product. For information about PDG/TTG licenses, contact your sales representative.
Hardware Requirements
Information in this section describes the hardware required to run the PDG/TTG software.
Platforms
The PDG/TTG operates on the ASR 5000.
Components
The following application and line cards are required to support the PDG/TTG on the ASR 5000:
System Management Cards (SMCs): Provides full system control and management of all cards within the ASR
5000. Up to two SMCs can be installed; one active, one redundant.
Packet Services Cards (PSCs/PSC2s): Provide high-speed, multi-threaded PDP context processing capabilities
for 2.5G and 3G services. Up to 14 PSCs/PSC2s can be installed, allowing for multiple active and/or redundant
cards.
Switch Processor Input/Outputs (SPIOs): Installed in the upper-rear chassis slots directly behind the SMCs,
SPIOs provide connectivity for local and remote management and for central office (CO) alarms. Up to two
SPIOs can be installed; one active, one redundant.
To Next Page
Loading...
