Cisco ASR 5000 Series - Ethernet 10;100 Line Card Interfaces

Technical Specifications
Interface Specifications ▀
Cisco ASR 5000 Series Product Overview ▄
OL-22938-02
BITS BNC Timing Interface
The BNC version of the SPIO interface card uses a BNC connector instead of a wire wrap interface. The following
figure shows the BITS BNC timing interface.
Figure 225. SPIO BITS BNC Timing Interface Pin-out
BITS 3-Pin Timing Interface
This 3-pin version of the SPIO interface card uses a 3-pin wire-wrap connector instead of a BNC interface. The
following figure shows the BITS 3-wire timing interface wire-wrap pin-out.
Figure 226. SPIO T1 BITS Timing Wire-Wrap Pin-out
Ethernet 10/100 Line Card Interfaces
Each of the eight RJ-45 interfaces available on the Ethernet 10/100 line card supports auto-sensing 10 Base-Tx or 100
Base-Tx Ethernet interfaces.
10/100 Mbps RJ-45 Interface
The RJ-45 interfaces on the Fast Ethernet line card support the following cable types and transfer rates. The following
figure shows the pin-outs for the RJ-45 Ethernet ports.