Features and Functionality - Base Software ▀
Cisco ASR 5000 Series Product Overview ▄
Features and Functionality - Base Software
This section describes the features and functions supported by default in the base software for the P-GW service and do
not require any additional licenses to implement the functionality.
Important: To configure the basic service and functionality on the system for the P-GW service, refer to the
configuration examples provided in this guide.
The following feature groups are supported and described in this section:
Subscriber Session Management Features
Quality of Service Management Features
Network Access and Charging Management Features
Network Operation Management Functions
System Management Features
Subscriber Session Management Features
This section describes the following features:
IPv6 Capabilities
Source IP Address Validation
Default and Dedicated EPC Bearers
Lawful Intercept
Local Break-Out
Subscriber Level Trace
Proxy Mobile IPv6 (S2a)
Mobile IP Registration Revocation
Session Recovery Support
IPv6 Capabilities
Enables increased address efficiency and relieves pressures caused by rapidly approaching IPv4 address exhaustion
problem.
The P-GW offers the following IPv6 capabilities:
Native IPv6 and IPv6 transport
To Next Page
Loading...
