Cisco ASR 5000 Series - RJ-45 SFP Interface

Technical Specifications
▀ Interface Specifications
▄ Cisco ASR 5000 Series Product Overview
OL-22938-02
Signal
Level
Max TX:
0 dBm
Min TX:
-9.5 dBm
Max RX:
0 dBm (saturation average power)
Min RX:
-20 (typ) / -19 (max) dBm (sensitivity average power)
RJ-45 SFP Interface
The 1000Base-T SFP interface on the Ethernet 1000/Quad Gig-E copper line cards require unshielded twisted pair
(UTP) copper CAT-5 cable with BER less than 10e-10. Pin-outs for the RJ-45 Ethernet ports are:
Figure 230. Ethernet 1000/QGLC RJ-45 Ethernet Interface Pin-outs
Table 115. Ethernet 1000/QGLC RJ-45 Ethernet Interface Pin-outs
Pin
1000Base-Tx 1Gbps Cat5+
1
BI DA+
2
BI DA-
3
BI DB+
4
BI DC+
5
BI DC-
6
BI DB-
7
BI DD+
8
BI DD-
RX = Receive Data TX = Transmit Data BI = BI directional data DA, DB, DC, DD = Data Pair A, B, C, and D