Cisco IP Phone 7800 Series - CHAPTER 24 Pair a Mobile Device with Your Desk Phone (8800 Series); Pair a Mobile Device with Your Desk Phone

CHAPTER 24
Pair a Mobile Device with Your Desk Phone (8800
Series)
• Intelligent Proximity for Mobile Phones, on page 97
• Pair a Mobile Device with Your Desk Phone, on page 97
• Switch Connected Mobile Devices, on page 98
• Delete a Mobile Device, on page 98
• View Your Paired Bluetooth Devices, on page 98
Intelligent Proximity for Mobile Phones
You can share your mobile contacts and call history with the desk phone. You can also view signal strength
and battery level of the mobile device on the desk phone.
Pair a Mobile Device with Your Desk Phone
After you pair your mobile device to your desk phone, the phone connects to the mobile device when the
device is in range. It disconnects from the mobile device when the device is out of range.
If you have both a Bluetooth headset and a mobile device connected, you cannot use the Bluetooth headset
to answer the audio from the mobile device.
After the mobile device and phone are connected, you can save your mobile contacts and call history on your
desk phone.
Before you begin
Make sure that your mobile device has Bluetooth turned on and that it is discoverable. Check the documentation
included with your mobile device if you need help.
Procedure
Step 1 On your desk phone, press Applications .
Step 2 Select Bluetooth > Add Bluetooth device.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
97