Cisco IP Phone 7800 Series - Cisco IP Phone 8800 Series Buttons and Hardware

8865NR886588618851NR8851884588418811Features
NoYesYesNoYesYesNoNoBluetooth
NoYesYesNoYesYesNoNoCisco
Intelligent
Proximity
Your phone must be connected to a network and configured to connect to a call control system. The phones
support many functions and features, depending on the call control system. Your phone may not have all
functions available, based on the way your administrator has set up the phone.
To make or receive a video call, you must use the Cisco IP Phone 8845, 8865, or 8865NR. The other phones
in the Cisco IP Phone 8800 Series only support audio calls.
When you add features to your phone, some features require a line button. But each line button on your phone
can support only one function (a line, a speed dial, or a feature). If your phone's line buttons are already in
use, your phone does not display any additional features.
To check which phone model you have, press Applications and select Phone information. The Model
number field shows your phone model.
You should save the box and packaging for the Cisco IP Phone 8845, 8865, and 8865NR. The cameras on
these phones are fragile. If you move the phone, we recommend that you pack the phone into the original box
to protect the camera. For more information, see Protect Your Video Phone Camera, on page 166.
Note
Cisco IP Phone 8800 Series Buttons and Hardware
The Cisco IP Phone 8800 Series has two distinct hardware types:
• Cisco IP Phones 8811, 8841, 8851, 8851NR, and 8861—do not have a camera.
• Cisco IP Phones 8845, 8865, and 8865NR—have a built-in camera.
The following figure shows the Cisco IP Phone 8845.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
164
Your Cisco IP Phone 8800 Series
Cisco IP Phone 8800 Series Buttons and Hardware