CHAPTER 4
Adjust Your Phone on Your Desk
• Change the Viewing Angle of Your Phone (7800 Series), on page 23
• Change the Viewing Angle of Your Phone (8800 Series), on page 23
• Adjust the Handset Rest, on page 24
• Secure the Phone with a Cable Lock (8800 Series), on page 24
Change the Viewing Angle of Your Phone (7800 Series)
You can change the angle of the phone, except the Cisco IP Phone 7811, to eliminate glare on the screen.
Procedure
Step 1 Unplug the phone from the network.
Step 2 Place the phone so that the keypad faces the desktop.
Step 3 Grasp one side of the footstand with one hand and place your other hand on the phone.
Step 4 Hold down the phone and pull up on the footstand.
Step 5 Turn the footstand over.
Step 6 Push the footstand back into the phone until the stand locks into place.
Step 7 Place the phone upright and plug it into the network.
Change the Viewing Angle of Your Phone (8800 Series)
You can change the angle of the phone to eliminate glare on the screen. If your phone has a video camera,
you can change the angle to improve the camera view.
Procedure
Step 1 Hold the receiver in the cradle with one hand.
Step 2 Move the footstand with the other hand to change the angle.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
23
To Next Page
Loading...
Need help?
General
