Cisco IP Phone 7800 Series - CHAPTER 9 Change the Sound on Your Phone; Mute Your Call; Adjust the Phone Ringer Volume; Your New ATA

CHAPTER 9
Change the Sound on Your Phone
• Mute Your Call, on page 35
• Adjust the Phone Ringer Volume, on page 35
• Change the Ringtone, on page 36
• Adjust the Volume During a Call, on page 36
• Adjust the Headset Feedback, on page 37
Mute Your Call
While you are on a call, you can mute the audio, so that you can hear the other person, but they cannot hear
you.
If you have a video phone, when you mute your audio, your camera continues to transmit video.
When your have a call muted, the LED for the Mute button or bar lights red.
Procedure
Step 1 Do one of the following actions:
• Desk phones—Press Mute .
• Conference phones—Press Mute .
Step 2 Press Mute again to turn mute off.
Adjust the Phone Ringer Volume
If your phone ringer is too loud or too soft when you get an incoming call, you can change the ringer volume.
Changes to the ringer volume do not affect the call volume you hear when you are on a call.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
35