CHAPTER 5
Answer Calls from Your Hunt Group on Your
Phone
• Answer a Call Within Your Hunt Group, on page 27
• Sign In and Out of a Hunt Group, on page 27
Answer a Call Within Your Hunt Group
Hunt groups allow organizations that receive many incoming calls to share the call load. Your administrator
sets up a hunt group with a series of directory numbers. Phones ring based on the hunt sequence that your
administrator specifies for a hunt group. If you are a member of a hunt group, you sign into a hunt group when
you want to receive calls. You sign out of the group when you want don't want calls to ring on your phone.
Before you begin
You must be signed into the hunt group to receive hunt group calls.
Procedure
When a hunt group call rings on your phone, answer the call.
Sign In and Out of a Hunt Group
Sign out of your hunt group to stop receiving calls from it. You continue receiving calls placed directly to
you.
Procedure
Step 1 Press Hunt Group (8800 Series) or HLog (7800 Series) to sign in.
A message confirms that you have signed in.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
27
To Next Page
Loading...
Need help?
General
