Cisco IP Phone 7800 Series User Manual

CHAPTER 6
Answer Calls on Your Analog Phone
• Answer a Call On Your Analog Phone, on page 29
• Answer Call Waiting on Your Analog Phone, on page 29
Answer a Call On Your Analog Phone
Your analogue phone works just like a Cisco IP phone.
Procedure
When your analog phone rings, pick up the handset to answer the call.
Answer Call Waiting on Your Analog Phone
When you're on an active call, you know that a call is waiting when you hear a single beep.
Procedure
Step 1 Perform a hook flash to speak with another caller who is calling you.
You connect to the second caller and put the first caller on hold.
Step 2 (Optional) To speak with the first caller, perform a hook flash again.
Subsequent hook flashes toggle you between the two callers. You can't create a conference this way.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
29

Cisco IP Phone 7800 Series Specifications

General

Protocols	SIP, SCCP
Bluetooth	No
Wi-Fi	No
Connectivity	Ethernet
PoE	IEEE 802.3af/at
Speakerphone	Full-duplex
Headset Support	Yes, via headset port
Ethernet Ports	Dual 10/100/1000 Ethernet ports
Codec Support	G.711, G.722, G.729, iLBC
Security	TLS, SRTP, 802.1X
USB Port	Yes
Mounting	Desk or wall
Audio	Wideband audio (G.722), Handset and speakerphone